Remove original drain plug and drain oil into acceptable receptacle. Insert Engine Oil Drain Valve with gasket and tighten. Do not over tighten. (Some oil pans are designed with recessed drain hole which may prevent the valve from being installed properly. If the valve can not be tightened all the way without hitting the oil pan wall, do not install the Drain Valve to your vehicle. Adaptors are available for some models) Make sure valve is closed and refill crankcase. Many units can be purchaced with a nipple that allows for attatching a hose for draining oil into small containers. Some like these for making the oil change process even cleaner. Note: Make sure you understand these hang a little lower on 2WD models.

Operation:

To open lift control lever and turn counter-clockwise 90 degrees. To close simply turn the lever clockwise 90 degrees until locked in original position.